Pfaff tipmatic 6122 User Manual

A-
S
"""""
...-...
~
prog
I - ..... -
Lj.
v
r a
G - 4 0 2-3 -
ib
G
- 4
- 2-3 -
Sewing on buttons
With zigzag st it ch G (stitch width 4 mm ) you
can sew on
two - and four -hole buttons wi th
no problem at all.
- Remove the sewing foot and lower the feed
dog .
- Turn
the handwheel towards you and move
the button in such a way that the needle
enters
the left hole in the button .
-
Now lower the presser foot lifter; this holds
the button off the blade.
-
Sew on the button . Take care to ensure that
the needle also enters the ri ght -hand hole
in
the button.
Securing
- Select straight sti tch by turning the width
knob (34) to O.
- Change the needle position with the knob
(35) so that the needle enters one of the
two holes.
-
Sew a few securing stitches.
Sewing on buttons with stems
- Insert the sewing foot .
-
Place a matchstick between the holes of the
button and sew it on as descr ibed on the
left.
- Remove
the match and pull the fabric and
the button apart.
-
Wrap the stem you have just created wi th
sewing thread and knot it.
39
,..,
a
:I

Pfaff tipmatic 6122 Specifications

General

Brand	Pfaff
Model	tipmatic 6122
Category	Sewing Machine
Language	English