Pfaff tipmatic 6122 User Manual

A
~
""'"
,---...
~
prog
I
---
~
v
[a
G
2.5 0 0 3-5
Bia s
tape
\b
G
2.5 0 - 3-5
bi nde r
Bias-tape binder
Binding with a bias tape is a simple way of
lending fab r ic edges a smooth, neat appea-
rance. You will need: bias tape, 24 mm
wide, unfolded.
- Remove the presser foot and the sewing
foot holder and screw on the tape binder .
-
Cut diagonally across the beginning of the
bias tape.
- Guide the tape into
the scroll of the tape
binder and
pull it out towards the back.
-
Set the tape binder in such a way that the
needle perforates 1 - 1.5 mm from the fol-
ded bias-tape edge or adjust the needle
position.
-
Sew a few centimeters (about an inch)
along the bias tape before you insert the
edge to be bound into the slot of the tape
binder. The raw edge must be placed bet-
ween the bias tape edges. The bias tape
automatically encloses the raw edge during
the sewing operation.
Tip : You can achieve an additional effect by
using the zigzag stitch
or a fancy stitch.
A
~
""'"
,---...
~
prog
I
---
~
v
\ a
G
3
0 0 3-5
Mu lti -
st it ch
[b
G
3 0
-
3-5
~th er i ng
a ac hm en
MUlti-stitch gathering attachment
The classic sewing foot! You can make closely
or wide ly spaced pleats as if by magic. The
multi-stitch gathering attachment can be used
in three different ways:
1.
Folding the fabric in pleats.
2. Folding the fabric in pleats and sewing
them simultaneously.
3. Folding the fabric in pleats, sewing them
on and sewing lace onto them simultaneo-
usly.
When you buy your mu l ti-stitch gathering
attachment
at your PFAFF dealer, full opera-
ting instructions are included.
79

Pfaff tipmatic 6122 Specifications

General

Brand	Pfaff
Model	tipmatic 6122
Category	Sewing Machine
Language	English