ENG
Operating Manual | Attachment and Installation Cooling Units | Multi Controller (MC) – 400 / 460 V, 3~ | 086100124 71/76
Hazards for the environment
Refrigerants are harmful to the environment as soon as they escape into the atmosphere.
• Only have work on the refrigeration unit carried out by experts in accordance with the chemicals climate protection
directive.
• Do not damage refrigerant lines.
• Pass on refrigerants for professional treatment.
Dismantling and disposal are to be carried out by the owner or persons authorized by him.
Contact the local authorities or special disposal companies for information on issues of environmentally friendly disposal.
9.2 Dismantling
Requirements
DANGER – Danger to life due to electric shock. Make sure that the unit is voltage-free.
Procedure
1. Switch off the unit, secure against switching back on and wait until all parts have a temperature below 40 °C.
2. Physically disconnect all energy and media supplies from the unit, discharge stored residual energy.
3. Clean dirt and contamination from the unit.
4. Remove operating and auxiliary materials and dispose of them in an environmentally friendly way.
5. Dismantle the unit into the different separable materials.
• Observe the valid work safety and environmental protection regulations.
To Next Page
Loading...
