Pfeuffer HE lite - Page 17

Operating instructions HE lite
© 2017 – Pfeuffer GmbH Revision 9 Page 17 of 28
Refill the measuring cell, switch on the
instrument and carry out a test
measurement with the original sample:
(Example)
The change of the calibration is marked
on the display by a »±« sign.
Thus you can see immediately during the
measurement, whether the test is carried
out with the original calibration.
Notice:
We recommend to document the changes of the calibrations, so that you can always retrace,
whether the measurement was carried out before or after a modification (see example).
Date Product
Result
HE lite
before
Result grain
dealer
Factor Offset
(factory=0)
Factor Gain
(factory=1)
Result
HE lite
afterwards
01.06.17 Wheat 15,9 15,4 -0,5 1,0 15,4
+
/
-
11.1 %
Barley
<—
Meas.
OFF