Operating instructions HE lite
© 2017 – Pfeuffer GmbH Revision 9 Page 21 of 28
Select the lowest menu item »Off«
and switch off by pressing .
Refill the measuring cell, switch on the
instrument and carry out a test measure-
ment with the new setting.
Now the first measurement is indicated
on the upper left and the calculated
average down on the right.
Refill the measuring cell and repeat the
measurement. The current second
measurement is indicated on the upper
left. The first measurement appears at
the second position
.
Refill the measuring cell and repeat the
measurement.
You can repeat the measurement
arbitrarily. The HE lite stores the last three
measurements according to the previously
selected settings, i.e. after the fourth
measurement only the average reading of
measurement 2, 3 and 4 is calculated. The
first measurement is cleared.
To Next Page
Loading...
