Pfeuffer Sample cleaner MLN User Manual

Operation
22 | 38
Operating instructions sample cleaner MLN | Revision 3
7.2 Cleaning the samples
 Place each collection pan under the outlets at the intended places.
 Fasten a dust collection bag at the cyclone.
Figure 11: Placing the collection pans and the dust collection bag
Item
Name
1
Outlet for sand, weed seeds and coarse dirt particles
2
Outlet - Cleaned sample
3
Dust collection bag
CAUTION
Dust warning
If the sealing of the dust collection bag against the outlet is insufficient, dust can be
discharged into the atmosphere.
Pollutants such as hazardous levels of Mycotoxins can be present in this dust!
 Check whether inhaling large quantities might lead to irritation or illnesses of the
respiratory passages, and if so then take appropriate measures.
 Monitor the outlet and air regulation. Pfeuffer GmbH recommends placing the sieves according to the
table given in chapter 7.5.
 Tare a collection pan on a pair of scales and fill it with approximately 1 kg raw material.
 All the collecting pans (PVC) are tared to 130 g ±0.1 so that re-taring is not applicable when weighing
again.
NOTICE
Do not keep any objects (tool, scissors, funnel, measuring cup, etc.) on the sample
cleaner.
When starting the cleaning process, they could fall in the working area and lead to
damages to the sample cleaner.
1
2
3

Pfeuffer Sample cleaner MLN Specifications

General

Brand	Pfeuffer
Model	Sample cleaner MLN
Category	Laboratory Equipment
Language	English