Pfeuffer Sample cleaner MLN User Manual

Maintenance and cleaning
30 | 38
Operating instructions sample cleaner MLN | Revision 3
8.1.2 Deawner
Getting rid of residual impurities:
 The deawner must be empty.
 Start the deawning process.
 The impurities generally come off after approximately 60 s.
If it is possible to clean the deawner bottom by hand, you must remove the filling container.
CAUTION
The deawner could start and lead to hand injuries!
 Pull the mains plug.
 Undo both the screws at the side of the filling container.
Figure 18: Screws at the filling container
Item
Name
1
Screw
 Remove the filling container from the deawner.
NOTICE
Make sure that you do not damage, cut or pull out any cables.
1

Pfeuffer Sample cleaner MLN Specifications

General

Brand	Pfeuffer
Model	Sample cleaner MLN
Category	Laboratory Equipment
Language	English