EasyManuals Logo

Pfeuffer Sample cleaner MLN User Manual

Pfeuffer Sample cleaner MLN
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Delivery, transport and storage
Revision 3 | Operating instructions sample cleaner MLN
4.2 Transport and packaging
Systems and machines of Pfeuffer GmbH are carefully checked and packaged before dispatching.
However, damages during the transport cannot be excluded.
Intake control
Run a completeness check using the delivery note.
In case of damages
Check the delivery for damages (visual inspection).
In case of complaints
If the delivery has been damaged during transport:
Retain the packaging (for the dispatcher to inspect or for return delivery).
Immediately inform the suppliers or Pfeuffer GmbH.
4.3 Temporary storage
Freight packaging of the sample cleaner and exchange parts and accessories is intended for a storage
duration of six months upon delivery.
Storage conditions
Closed and dry room with a room temperature from minimum -10 °C to maximum +50 °C
4.4 Transport to installation location (of customer)
The machine must be transported by skilled personnel only and in accordance with the
local conditions and, if applicable, the information on the packaging material.
Sample cleaner MLN is supplied to the installation location of the customer on a transportation pallet.
CAUTION
The machine can topple during transport. Pay attention to the centre of gravity (it lies
approximately near the centre) and the weight (refer to technical data).
Before transporting, secure the machine with the respective lifting means.
Transport with forklift truck
Packing items that are packaged on pallets or in boxes can be transported by a crane under the following
conditions:
The forklift truck must be constructed according to the weight of the transport unit.
The driver must be authorised to drive the forklift truck.
Lashing:
Move the forks of the forklift truck between or under the
pillars of the transport pallet of the machine.
While doing so, make sure that the forks of the forklift
truck have been pushed through to a sufficient degree
(the forks must stick out on the opposite side).
Lift the machine and transport it.
Figure 3: Diagram of transport by forklift

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pfeuffer Sample cleaner MLN and is the answer not in the manual?

Pfeuffer Sample cleaner MLN Specifications

General IconGeneral
BrandPfeuffer
ModelSample cleaner MLN
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals