To Next Page

To Previous Page

Introduction

Revision 3 | Operating instructions sample cleaner MLN

5 | 38

1 Introduction

1.1 Intended use

Sample cleaner MLN helps in determining the total dockage (German = Besatz) associated with grain crops

and grading the said crops. The cleaning process largely corresponds to that of a normal cleaning machine.

The proportion of impurities (coarse particles, fine particles, aspiration discharge), that of small grains and

that of quality grains can be determined with the help of a sample at the time of acceptance. This

facilitates the acceptance of quality grains and the targeted exclusion of batches that do not fulfil the

contractual conditions.

Sample cleaner MLN is designed as a portable machine with a power plug.

Private use of the machine is prohibited.

NOTICE

This machine was designed solely for the aforementioned purpose.

Using it for any other purpose or modifying it without the written consent of the

manufacturer is not considered to be in compliance with the intended use. The

manufacturer shall not be liable for the resulting damage. Damage caused by such an

unintended use is at the sole risk of the operator.

The machine is allowed to be operated only if it is ensured that all the safety devices

are functional and the system in which this machine is installed complies with the EU

directives.

Cleaning flour, dust and grit is forbidden.

The samples to be used for the correct operation of the machine are provided by the

operator of sample cleaner MLN.

The operator bears sole responsibility for the proper handling of these materials and

the associated dangers.

Hazard notes and instructions for disposal must be provided by the operator.

The sample must be disposed of after the examination.

Intended use includes also the compliance with the Instruction Manual and User´s Guide as well as the

maintenance and servicing conditions, as specified in these Operating Instructions.

These Operating Instructions do not relieve the operating company of the obligation to develop and to

apply independent health and/or safety regulations or safe working processes which are aimed at the

requirements of the overall machine, as well as the obligation to monitor their compliance.

Pfeuffer Sample cleaner MLN User Manual

Questions and Answers: