PFT G 5 SUPER - Accessories

PFT G 5 SUPER Operating Manual Issued 11.2008
Knauf PFT GmbH & Co.KG
35
Accessories
PFT Injection Hood for the G 5 (Item No. 00 04 43 34)
The PFT injection hood fills dry mortar in the PFT G 5 SUPER with the help of
the SILOMAT. When the G 5 SUPER hopper is empty, the machine stops
working.
PFT Delivery Hood for G 5 SUPER cpl. (ltem No. 00 07 17 48)
The PFT delivery hood fills dry mortar in the PFT G 5 SUPER directly from the
silo or dry mortar container. When the PFT G 5 SUPER hopper is empty, the
mixing pump stops working.
ROTOMIX D-Pump with 35 coupling (Item No. 20 11 80 00)
Agitator for the improved solubilisation and mixing of the material.
Direct drive via the rotor tenons. Volume of approx. 1.2 l
All guidelines of the material manufacturer must be observed!
ROTOQUIRL II, cpl. with size 35 coupling (item no. 20 11 84 00)
Agitator for the improved solubilisation and mixing of the material.
Direct drive via the rotor tenons. Volume of approx. 4.2 l
All guidelines of the material manufacturer must be observed.
Star wheel spacer for coarse plaster (item no. 20 10 19 00)
Increases the distance between the star wheel and the base of the material
hopper by 3 mm
Nozzle for water intake with Geka coupling (item no. 20 21 58 00)
For the improved injection of water into the mixing area in the event of a low
water factor.
Further accessories can be found on the Internet under www.pft.de
or at your local PFT machinery
dealer.