PFT G 5 SUPER - Basic Safety Instructions

PFT G 5 SUPER Operating Manual Issued 11.2008
Knauf PFT GmbH & Co.KG
9
Basic safety instructions
NOTE:
Special information for running the machine efficiently.
WARNING!
Special instructions, regulations and restrictions for the prevention of damage.
WARNING!
The machine should only be used if it is in flawless technical condition and in compliance with the
regulations. Pay attention to safety and the operating instructions. It is especially important to
immediately correct any faults that could impair safety.
In order to make the operation of our machines as easy as possible for you, we would like to briefly
inform you of the most important safety instructions. If you comply with these instructions, you will
be able to use our machine in a safe and quality-assuring manner for a long time to come.
WARNING!
The following terms and symbols are used in this manual for particularly
important information:
WARNING!
The machine should only be used if it is in flawless technical condition
and in compliance with the regulations. Pay attention to safety and the
operating instructions. It is especially important to immediately rectify all
faults which could impair safety.
In order to make the operation of our machines as easy as possible fo
r
you, we would like to briefly inform you of the most important safety
instructions. If you comply with these instructions, you will be able to use
our machine in a safe and quality-assuring manner for a long time to
come.
WARNING!
If additional parts that are not specified in these operating instructions
are installed for special procedures, it is necessary to adhere to the
utilisation, safety and maintenance regulations.
WARNING!
It is prohibited to use the machine for purposes other than those fo
r
which it is intended.