PFT G 5 SUPER - Page 43

PFT G 5 SUPER Operating Manual Issued 11.2008
Knauf PFT GmbH & Co.KG
43
Ltem. Qty Part no. Description
1 1 00 08 94 32 Suction flange D-pumps with O-Ring L 200 galv.
2 1 20 10 42 30 O-ring 117 x 5 for suction flange
3 1 00 08 94 31
Suction flange D-pump for o-ring L=200 galvanic yellow galv.
4 1 20 11 30 00 Rotor D 6-3
5 1 20 11 87 80 Tie rods M 16 x 370 mm (1 set = 2 pieces)
6 2 20 20 99 21 Collar nut M 16 DIN 6331 galv.
7 1 00 00 17 92 Double nipple 1 1/4" x 60 no. 23 galv.
8 1 20 20 07 90
Coupling 35 female 1 1/4" int. thread with gasket
9 1 00 09 90 88
Gauge with plastic inlet housing 0-100 bar 1/2" pressure reducer VA
10 1 00 10 22 28
Mortar pressure gauge 35 mm galv. cpl.
11 1 00 09 94 52
Coupling 35 M-part 1 1/4" ext. thread with 1/2" boring
12 1 20 20 07 90
Coupling 35 female 1 1/4" int. thread with gasket
13 1 20 20 03 30 Coupling reduction 35/25 male ID 24
14 1 00 04 16 64
Pressure flange for D-Pumps G 4 galv. 1 1/4" inner thread
15 1 00 00 88 62 Stator TWISTER D 6-3