PGO BR-500 - Page 27

N.B.:
If you need to overhaul the bearings on an assembleddriven pulley unit, it is necessary to support the unit by
the bell
001467Y002.
- Check that the bushing is
free from wear or damages; if
so, replace the fixed driven
half-pulley.
- Remove the lock ring using
pliers.
- Using the specific tool
inserted through the roller
bearing, pull out the ball
bearing.
N.B.:
Properly support the
pulley to prevent damaging
the threading.
Specific equipment and
tools:
Handle 020376Y
24-mm adapter 020456Y
20-mm guide 020363Y
- Remove the roller bearing by
the specific tool, supporting
the fixed half-pulley with the
bell.
Specific equipment and
tools:
Handle 020376Y
Adapter 28x30 mm
020375Y
25-mm guide 020364Y
Bell 001467Y002
PGO BR-500 ENGINE
P.10-8
Automatic Transmission