Phanteks Enthoo Primo User Manual

18
9. PSU INSTALLATION (OPTIONAL)
(4x)
* Unscrew the panel to reveal the psu
mounting location
电源位为右侧隐藏式设计—安
装电源时请先拆除右侧板
** We recommend this install as your optional PSU location.
Airow will be restricted if PSU is installed.
以上为我们推荐的电源安装方式，这样会提
高系统的散热效率
**
Rear
PSU RUBBER STAND
Align the PSU with the mounting holes and use the screws to secure the PSU to the chassis.
对齐后板与电源螺丝孔，使用4颗螺丝锁电源到后板上

Phanteks Enthoo Primo Specifications

General

Brand	Phanteks
Model	Enthoo Primo
Category	Enclosure
Language	English