Phanteks ENTHOO PRO II - Installing the Motherboard; Standoff Positioning Guide

10
INSTALLING MOTHERBOARD
Some motherboards require installation or repositioning
of the standos. Please consult your motherboard
manual for the correct stando positioning.
STANDOFF POSITIONING
Micro ATX/SSI-EEB
(install extra standos)
ATX / E-ATX (Pre-installed)
For repositioning standos
9x
REQUIRES:
Use the motherboard screws from the toolbox to install your motherboard on the
pre-installed standos.
These standos have a special collar to keep the
motherboard in place when installing vertically.
ENTHOO PRO II