19
DRAIN PORT
We highly recommend installing a drain port if you plan to install a custom water-cooling conguration. This will ensure an easy
maintenance in the future.
The Drain Port is installed in the Front
Panel using a Passthrough Fitting and
a Stop Fitting / Ball Valve. The port
diameter is 20.5mm.
Phanteks Passthrough tting:
PH-PTF_BK/CR_G1/4
Phanteks Stop tting:
PH-PG_BK/CR
Phanteks Ball-Valve tting:
PH-BVA_BK/CR_G1/4
INSTALLING DRAIN PORT ENTHOO PRO II
To Next Page
Loading...
