20
Hold the GPU in the correct position when
tightening the thumbscrews.
3
2
4
INSTALLING GPU ANTI-SAG BRACKET
1.
2.
3.
4.
INSTALL ALL GPU AND PCI CARDS
PLACE THE GPU ANTI-SAG BRACKET
INSERT THE THUMBSCREWS WITHOUT
TIGHTENING THEM
PRESS DOWN AND LOCK THE THUMBSCREWS
IN POSITION.
Always loosen the 2 thumb screws before
removing any GPU or PCI cards.
2x
REQUIRES:
To prevent your GPU from tipping down you can install the GPU Anti-Sag Bracket.
INSTALLING GPU ANTI-SAG BRACKET ENTHOO PRO II
To Next Page
Loading...
