PHICOMM KE 2P User Manual

P a g e 38 | 49
Static IPv6
 IPv6 Address - Enter the IPv6 address provided by your ISP.
 Default Gateway - Enter the default gateway provided by your ISP.
 MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But
this is rarely required and should not be done unless you are sure it is necessary for
your ISP connection.
 Primary DNS IP - Enter the DNS IPv6 address provided by your ISP.
 Secondary DNS IP - Enter another DNS IPv6 address provided by your ISP.
P a g e 39 | 49
Tunnel 6to4
 IP Address/Subnet Mask/Default Gateway - The IPv4 address/ subnet mask/ default
gateway assigned, in dotted-decimal notation.
 Tunnel Address - The 6to4 tunnel address created by the device to access theIPv6
network.
 MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But
this is rarely required and should not be done unless you are sure it is necessary for
your ISP connection.
 User-defined DNS default closed station - If your ISP does not give you any DNS IPv6,
the user can open the switch manually.
 Primary DNS IP - Enter the DNS IPv6 address provided by your ISP.
Secondary DNS IP - Enter another DNS IPv6 address provided by your ISP.

PHICOMM KE 2P Specifications

General

Color	silver
Wi-Fi Speed	1267 megabits per second
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac, n
Gigabit Ethernet Speed	yes
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa2-psk
Ports	rj-45
LAN Ports	4
WAN Ports	1

Weight and Dimensions

Height	1.1 inches
Width	7.1 inches