Philips 10FF2 Series - Time, Date and Clock; Show Clock

Press Play Slideshow to leave this menu and
play the slideshow.
6.4 Time, Date and Clock
Use this function to set the time and date of the
PhotoFrame.
1
• Press the menu button to access the
Main Menu.
• Navigate down to highlight the setup icon.
• Navigate right or press the OK button
to access the setup menu.
2
• Navigate down to Time and Date.
• Navigate right to access the Time and
Date settings.
3
• Navigate right to go to Time.
• Navigate right and down to go to Date.
4
Time:
• Navigate up and down to select the time.
• Navigate left and right to move between
hours, minutes and AM/PM.
• Press the OK button to confirm selection.
Date:
• Navigate up and down to select the date.
• Navigate left and right to move between
days, months and years.
• Press the OK button to confirm selection.
Show Clock:
• If you want to use the PhotoFrame as a
clock.
• Navigate up and down to select Show
clock.
• Navigate right then up and down to
select No Clock ,Full Screen , In Slideshow
or Both.
• Press the OK button to confirm selection.
Press Play Slideshow to leave this menu and
play the slideshow.
44
Settings