EasyManua.ls Logo

Philips 14PV220 - 6 Manual Recording; Recording Without Automatic Switch-Off; Recording with Automatic Switch-Off (OTR One-Touch-Recording); Protecting Your Recordings

Philips 14PV220
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use the ’Manual recording’ function to spontaneously start
recording (e.g. to record a TV show already in progress).
E Please refer to section ’Recording without automatic
switch-off’, if you want to manually start and stop your
own recording.
E Please refer to section ’Recording with automatic
switch-off’, if you would like to start your own recording
but want it to end automatically (e.g. not to record all the
way to the end of the cassette).
Recording without automatic switch-off
a Place a cassette in the machine.
b Use the button ;P q or =P r to select the
programme number which you would like to record from,
e.g. ’P01’. This picture will appear on the screen:
0:01:20
P01 BBC1
DIf a TV channel sends a channel name, this is
displayed on the screen.
DProgramme number E1 is provided for recording
from external sources (via the EXT scart socket).
Programme number AV is for recording from the
audio and video front sockets.
c To record the TV programme, press the button
RECORD n on the remote control or the button n on the
TV-Video Combi.
DDuring recording, the recording lamp RECORD 5’on
the front of the machine lights up. The following will
appear on the screen:
0:01:20
P01 BBC1
DUse the button OK to display the current tape
position on the screen.
d Stop recording with the STOP h button.
DIf you would like to turn off the screen during the
recording, press the button STANDBY m .
DTo switch the screen back on again, press the
;P q button.
DWith the screen switched off you can only stop a
recording in process by pressing the button
STANDBY m for more than 3 seconds.
DDuring a recording you can only watch the current
programme.
Recording with automatic switch-off
(OTR one-touch-recording)
a Place a cassette in the machine.
b Use ;P q or =P r to select the programme number
of the TV channel you wish to record.
c Press the RECORD n button on the remote control.
d Press the RECORD n button on the remote control several
times to add 30 minutes to the recording time.
DTo cancel this entry, press the CLEAR (CL) button.
DThe recording time can be extended only to up to 4
hours.
Protecting your recordings
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
6. MANUAL RECORDING
17

Table of Contents

Related product manuals