Philips 2000 series - Cleaning and maintenance; Checking the filter status; Cleaning the body of the air purifier; Cleaning the particle sensor

8 EN
Checking the lter status
• Touch the lter status check/reset button to check the lter service life
status�
Icon color Display (%)
Blue 16-100
Blue-purple 9-15
Purple-red 4-8
Red 0-3
Note: The appliance goes back to normal display if no operations after 3 seconds�
4 Cleaning and maintenance
Note:
• Do not attempt to clean the particle sensor with a vacuum cleaner�
• Switch o the air purier and unplug from the power socket before following action�
Cleaning the body of the air purier
Use a soft, dry cloth to clean both the interior and
exterior of the air purier and the air outlet�
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the
appliance�
1 Clean the particle sensor inlet
and outlet with a soft brush�
2 Clean the particle sensor with a
damp cotton swab� Dry all parts
thoroughly with a dry cotton swab�