Philips 2000 series User Manual

10 EN
Replacing the lter
Note:
• The lter is not washable or reusable�
• Do not smell the lter as it has collected pollutants from the air�
When the lter need to be replaced, the lter
replacement alert lights up red�
1 Replace the lter with Philips NanoProtect lter Series 3 (FY2180/30) ,
Please follow the step of Chapter “Installing the lter”�
3
s
2 Touch the button
to switch on the
appliance�
3 Touch and hold the
lter status check/
reset button for
3 seconds to reset
the lter replacement
time�
4 Wash your
hands
thoroughly after
replacing the
lter�

Philips 2000 series Specifications

General

Room size	Up to 79 m²
Filtration	HEPA and activated carbon filter
Particle filtration	99.97% at 0.3 microns
Filters out	gases
Modes	Auto, Turbo and Sleep
Air quality sensor(s)	PM2.5