Philips 2000 series User Manual

9EN
Cleaning the surface of the lter
Clean the surface of lter with vacuum cleaner
when the lter cleaning alert display on the
screen�
1 Pull the
back
cover and
remove it
from the
appliance�
2 Pull the
lter
from the
appliance�
3 Clean the
surface of
the lter
with a
vacuum
cleaner�
4 Put the
lter back
into the
appliance�
5 Reattach
the back
cover�
3
s
6 Touch the button
to switch on the
appliance�
7 Touch and hold the
lter status check/reset
button for 3 seconds
to reset the lter
cleaning time�
8 Wash your hands
thoroughly after
cleaning the lter�

Philips 2000 series Specifications

General

Room size	Up to 79 m²
Filtration	HEPA and activated carbon filter
Particle filtration	99.97% at 0.3 microns
Filters out	gases
Modes	Auto, Turbo and Sleep
Air quality sensor(s)	PM2.5