Philips 220E1SB/00 - Foreword; Lcd; Product Profile; Scanning Frequencies

84
Meridian 1
1. FOREWORD
This specification describes a 21.5″ FHD multi-scan color TFT LCD monitor with maximum resolution up to 1920 x
1080/75Hz non-interlaced.
All optical characteristics (including White-D, Brightness and so on) are determined according to panel specification
after warming up approximate 30 minutes that brightness stability is optimal, and follow strictly after panel
specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in Philips styling cabinet which has an integrated tilt
base.
LCD
Priority: 1. CMO M216H1-L01
Type: TN
Suppliers to offer the panel specification.
Panel incoming specification: Follow Philips’ specification.
CMO M216H1-L01
Type NR. : M216H1-L01
Resolution :1920 x 1080 (FHD)
Outside dimensions :499.5 (H) x 292.6 (V) x 17.0 (D)mm (Typ.)
Pitch (mm) :0.248 mm x 0.248 mm
Color pixel arragnement : 1920 horizontal By 1080 vertical Pixels. RGB stripe arrangement
Display surface :Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth :16.7M colors
Backlight :4CCFL
Active area (W xH) :477.50 (H) x 268.59 (V)
View angle (CR>10) : R/L 170(Typ.), U/D 160(Typ.)
Contrast ratio :1000:1 (Typ.) 700:1 (Min)
White Luminance : 300cd/m2(Typ) 250(Min)
Color gamut :>=72%
Gate IC :
Source IC :
Response time :5ms (Typ.) 8ms (Max)
Vertical frequency range :58.1~85Hz
Scanning frequencies
Hor. : 30 – 80 KHz
Ver. : 56 - 76 Hz
Video dot rate : <205 MHz (analog), EDID: 170MHz
<165 MHz (digital), EDID: 170MHz
Power input
: 90-264 V AC, 50/60
±
2 Hz
Power consumption : 40W (typ.), < 42 W maximum
Functions: