88
Meridian 1
Horizontal scanning
Sync polarity :positive or negative
Scanning frequency :30-83KHz
Vertical scanning
Sync polarity :positive or negative
Scanning frequency :56-76Hz
Power input connection
Power cord length :1.5m
Power cord type :3 leads power cord with protective earth plug
Power management (supplier to input)
The monitor must comply with the Microsoft on Now specification and meet EPA requirement.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On active
40W Typ.
Green LED --
< 42 W Max.
Power saving Off Off blanked < 0.8W Amber LED < 3 s
DC Power Off N/A < 0.5 W LED Off
VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
DDC/CI support
In accordance with VESA DDC/CI and MCCS ver.2.0
Data for EDID & INF file
Data for EDID & .inf file
1 User visible strings on .inf file
Philips 220E (22inch Wide LCD MONITOR 220E1)
2 Manufacturer ID ( EDID data)
PHL
3
Product ID, "xxxx" 4 codes
MSB(byte 12): C0
LSB (byte 11): 2E
4 maximum resolution
1920x1080
5 Horizontal Frequency Range
30~83 KHz
6 Vertical Frequency Range
56~76Hz
7 Monitor Name (13 characters max.)
Philips 220E
Hot-key definition
HOT KEY.xls
Any deviation between document and sample, please refer to Philips approved sample.
Smart contrast (Dynamic contrast ratio)
Smart Contrast is a kind of dynamic backlight control.
This function changes panel backlight dynamically according to the frame brightness histogram.
At least the minimum contrast ratio has to be > 8000:1(typ).
To Next Page
