Philips 220E1SB/00 - Color for Resin;Paint; Cosmetic; Gap between Panel and Front Bezel; Location of Control Icons

90
Meridian 1
Production alignment spec.
CIE coordinates (x,y)
9300K
x = 0.283 ± 0.006
y = 0.297 ± 0.006
6500K/sRGB
x = 0.313 ± 0.006
y = 0.329 ± 0.006
sRGB
x = 0.313 ± 0.006
y = 0.329 ± 0.006
Quality Inspection specification:
CIE coordinates (x,y)
9300K
x = 0.283 ± 0.015
y = 0.297 ± 0.015
6500K/sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
* TPV OTS model, but the Perfect Tune function is also apply for this model at the TPV production line.
5. Mechanical characteristics
Cosmetic
Philips ID
Mechanical data files
ProE files required
Location of Philips Logo
Per Philips make-up sheet
Gap between panel and front bezel
< 1.4mm (typ.)
Location of Control Icons
Per Philips Graphic sheet
Color for resin/paint
Per Philips make-up sheet
Resins
• RoHS required
• WEEE required.
• Resin type/selection refers to Project Book Section 7.2 Plastic material.