Philips 243V5LAB Series User Manual

Service Manual 243V5LAB
4
1.3 Important
This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual
before you use your monitor. It contains important information and notes regarding operating your monitor.
The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its
operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase,
dealer’s name and model and production number of the product.
1.3.1 Safety precautions and maintenance
Warnings
Use of controls, adjustments or procedures other than those specified in this documentation may result in
exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor.
Operation
• Please Keep the monitor out of direct sunlight, very strong bright lights and away from any other heat source.
Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the monitor, make sure the power plug and outlet are easily accessible.
• If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the
power cable or DC power cord for normal operation.
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with
your local service center. (Please refer to Customer Care Consumer Information Center)
• Do not subject the monitor to severe vibration or high impact conditions during operation.
• Do not knock or drop the monitor during operation or transportation.
Maintenance
• To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving
your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.
• Unplug the monitor if you are not going to use it for an extensive period of time.
• Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth
when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean
your monitor.
• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or
excessive moisture environment.
• If your monitor gets wet, wipe it with dry cloth as soon as possible.
• If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power
cord. Then, remove the foreign substance or water, and send it to the maintenance center.
• Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in
a location that falls within the following temperature and humidity ranges.
• Temperature: 0-40eC 32-95eF
• Humidity: 20-80% RH

Philips 243V5LAB Series Specifications

General

Brand	Philips
Model	243V5LAB Series
Category	Monitor
Language	English