Service Manual 243V5LAB
11
2.2 Connecting to your PC
2.2.1 Connect to PC
1. Connect the power cord to the back of the monitor firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the monitor signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2.2.2 Operating the monitor
1) Front view product description
To Next Page
Loading...
Need help?
General
