Service Manual 243V5LAB
10
Note
This monitor accepts a 100mm h 100mm mounting interface
Caution
For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.5Kg.
2.1.4 Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to
your own preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor’s angle from -5eto 20e.
Note
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
To Next Page
Loading...
