Philips 32BDL4050D - 4 Operation; Watch the Connected Video Source; Change Picture Format; Android Launcher

32BDL4050D
18
4. Operation
NOTE: Thecontrolbuttondescribedinthissectionismainlyonthe
remotecontrolunlessspeciedotherwise.
4.1. Watch the Connected Video Source
Seepage14forexternalequipmentsconnection.
1. Press [ ] SOURCEbutton.
2. Press[ ] or[ ]buttontochooseadevice,thenpress[ ]button.
4.2. Change Picture Format
Youcanchangethepictureformattosuitthevideosource.Eachvideo
sourcehasitsavailablepictureformats.
Theavailablepictureformatsdependonthevideosource:
1. Press[ ] FORMATbutton.
2. Press[ ] or[ ]buttontochooseapictureformat,thenpress
[ ]button.
• PCmode:{Full}/{4:3}/{1:1}/{16:9}/{21:9}/{Custom}.
• Videomode:{Full}/{4:3}/{1:1}/{16:9}/{21:9}/{Custom}.
4.3. Android Launcher
1. AndroidPDlauncher:
• Android PD launcher is black page, as below:
• Every app leaves by pressing the back key. The screen will go to
Android PD launcher.
• When you return to android PD launcher, the screen will show
hint image, The hint image only shows 5 seconds as below:
• The hint image will notify you can press source key to change
source.
2. Adminmode:
• You can press “Home + 1888” to startup admin mode.
• Admin mode will show four icons: “Settings”, “Apps”, “Network”
and “Help”.
• When you leave admin mode, system will return to last source.
1)Homepageofadminmode,thispagehasfouritems:“Settings”,
“Apps”,“Network”and“Help”.
Settings:gotosettingsapp.
Applications:showallapps.
Network:setwiorethernet.
Help:displayQRcode.
2.)Applicationpage:
3
）
Networkpage
4)Wi-Fipage: