Service Modes, Error Codes, and Fault Finding
EN 37Q529.1E LA 5.
Figure 5-18 Example UART log during SWUPG startup (Normal startup) part 1.
UªUretail Jan 16 2008 12:03:04
Boot deviceST NAND512W3A
BFFS init
OK
Searching BootLoader.tdfLoad /bffs0/BootLoader.tdf- Done
Start /bffs0/BootLoader.tdf
JBL (boottime improvement
BootLoader OS_R0.7.2assert Feb 25 2008 12:49:28Searching boot.bat
Execute /bffs2/boot.bat from label [1]
* SR1->Coldboot
* On error goto 60
* Load /bffs2/atvTm0App.tdf - ok
* Load /bffs3/tmpvbPnx51xxApp.tdf - ok
* Load /bffs2/cdDownloadTM0.tdf - ok
* Starting earlyStartTM* Load /bffs3/tmvprPnx51xxCoApp_tm2.tdf - ok
* Load /bffs3/tmvprPnx51xxCoApp_tm3.tdf - ok
* Load /bffs2/Kernel.tdf - ok
* MemFill 0x87fff000 0x1000 0xff
* Signal 30
* Cmd Line
CMD_LINE arguments passed by JBL : console=ttyS0,38400n8 mem=48M kgdb=ttyS1 l
oglevel=3 root=/dev/mtdblock5 lpj=1196032 init=/init ip=none jffs2_gc_delay=30
* Start /bffs2/Kernel.tdf"htv520EU/92 startup script ..."
"Mounting file systems"
Total usertime mount for /proc: 0,000000 [Sec]
Total systemtime mount for /proc: 0,000000 [Sec]
Total usertime mount for /sys: 0,000000 [Sec]
Total systemtime mount for /sys: 0,000000 [Sec]
Total usertime mount for /dev/shm: 0,000000 [Sec]
Total systemtime mount for /dev/shm: 0,000000 [Sec]
Total usertime mount for /dev/pts: 0,000000 [Sec]
Total systemtime mount for /dev/pts: 0,010000 [Sec]
"Mounting the flash file systems"
Total usertime mount for /mnt/jffs0: 0,000000 [Sec] _______> Mount time for JFFS partitions
Total systemtime mount for /mnt/jffs0: 0,080000 [Sec]
"Loading PNX5100 Image"
"Launching TV application"
------------------------------------------ Here TV Application is starting up ----------------------
Using errlib version 0.9
Errlib communication with plfapp failed, will retry later
redirecting 1 to 14
00 002.414 128MB memory on board
00 002.414 128MB memory MAP
00 002.414 checking hotboot: NO
00 002.414 Standby version 40.x.0.0
00 002.414 start_Init clearing m_InitDoneBlunk
00 002.414 Using errlib version 0.9
00 002.414 Errlib 0.9 registered from process 118
00 002.414 2343 - Reference timestamp
00 002.414 mounted: </dev/mtdblock6>
00 002.414 Mount check passes, 0 iterations
-1 002.517 (*) FusionDale/Config: Parsing config file '/etc/fusiondalerc'.
-1 002.517 *--------------) FusionDale v0.1.1 (--------------*
-1 002.517 (c) 2006-2007 directfb.org
-1 002.517 -----------------------------------------------
-1 002.517 (*) Fusion/SHM: NOT using MADV_REMOVE (2.6.18.0 < 2.6.19.2)! [0x02061200]
-1 002.517 (*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 119)...
-1 002.527 redirecting 2 to 12
-1 002.527 starting : /philips/apps/ceplfapp
-1 002.527 amApp : InitFusionDale
-1 002.527 Errlib communication with plfapp failed, will retry later
00 002.639 /mnt/jffs0/rupg/tvplf/cetv/display found - Layoutcheck OK
00 002.639 Display flash file : Layout version = 8 ; Content version = 17
00 002.639 Display flash file : Project Id = 1 ; Branch Id = 0
00 002.639 version string: DISPT_001.000.008.017
00 002.639 Using screen option 142, name LCD LGD WUF SAA1 42"Errlib 0.9 registered from process 116
00 002.695 *--------------) FusionDale v0.1.1 (--------------*
00 002.695 (c) 2006-2007 directfb.org
00 002.695 -----------------------------------------------
00 002.802 Diversity: BoardType=/92, BoardVersion=3, Detected pnx8535 version=M2
00 002.802 AmbientLightGenerator : Epld
00 002.802 AmbientLightMode : LeftRight
00 002.802 AmbientLightTechnology : Led
00 002.802 CabinetNumber : 3
00 002.802 ChannelDecoderType : Tda10048
00 002.802 ChannelDecoder2Type : Tda10023
00 002.802 ClearLcdSupported : False
00 002.802 DimmingBacklightSupported : True
00 002.802 DisplayDelayCompensation : 36 - 190
00 002.802 DisplayRawNumber : 142
00 002.802 DvbHdSupported : False
00 002.802 EpldPresent : True
00 002.802 HDMIMuxPresent : Mux4
00 002.802 IfDemVersion : V2
00 002.802 LightSensor : Present
00 002.802 LightSensorType : Aura
00 002.802 Sti7100Present : True
00 002.802 PacificPresent : False
00 002.802 Region : Europe
00 002.802 Pnx5050Present : False
00 002.802 Pnx5100Present : True
00 002.802 SawVersion : New
00 002.802 IF Mode (DVB-C) : Direct IF
00 002.802 TunerI2cConfig : ViaChannelDecoder
00 002.802 TunerType : 26 (Phil4MkTd1716F)
-1 002.916 amApp: Platform returned wakeup reason [src: 0, sys: 0, cmd: 0]
-1 002.919 starting : /philips/apps/tveu 4 0 0
00 003.082 RU Flash file not found in /mnt/jffs0/rupg/tvplf/tv520avi/cabinet3
I_17662_004a.eps
110608
To Next Page
Loading...
