13
AUTOREWIND SWITCH
Especially for transcription, it is recommended
that the autorewind switch (14) be set to AR to
take advantage of the 725«s autorewind
function. When set to AR, the 725 auto-
matically rewinds the cassette to the beginning
as soon as it is inserted. The rewind arrows in the LCD display show you that
the tape is being rewound.
Set the autorewind switch to OFF if you do not wish to take advantage of this
feature.
SEARCH
The SEARCH key (10) has three different fun-
ctions which make it particularly easy to move
to any specific piece of dictation on a cassette.
The LCD display shows you that a search
function is in progress by displaying the search
symbol (the wind arrows together with a vertical line).
SEARCH FORWARDS
Pressing the SEARCH key once causes the tape to be wound automatically to
the next index marking from the current position. Then play back the text as
normal.
SKIP
For example press the SEARCH key 3 times to skip automatically to the 3rd
index marking from the current position. Then play back the text as normal.
Or press search key the bequiers number of times.
PREVIEW
Preview the contents of a cassette by holding the SEARCH key down till the
tape starts moving (approx. 0.5 seconds). The search symbol in the LCD
display blinks while the tape is wound to the next index. This piece of
dictation is played back for approximately 5 seconds, during which time the
preview symbol (arrow plus blinking arrow and line) is displayed. The tape is
then wound in fast forwards mode to the next index mark, and so on till the
end of the cassette is reached. Interrupt the preview process by pressing any
function key on the keypad. This function is then implemented, e.g. stop,
play, rewind, etc.
To Next Page
Loading...
