Philips 75BDL3052E - Connecting External Equipment; Touch Operation Guide

65BDL3052E/75BDL3052E/86BDL3052E
26
4.7. Touch Operation
This display is equipped with a touch-sensitive screen and
supports the Windows Touch features either by single touch or
multi-touch operation. You can touch the pictures or text on
the display gently with your ngers, and the system will react.
This section explains about the touch operation on the display.
For further detail on how to run the touch operation, please
refer to the Windows operation instruction.
Single Tap
Touch the target on the screen with one ngertip for one quick
tap, then release.
Please note that a touch screen will respond to a light touch
from your ngertip when tapping on touch screen.
Double Tap
Touch the target on the screen with one ngertip for two quick
taps, then release.
Pan
Touch the target on the screen with one ngertip and move
across the target without losing direct contact, then release.
Flick
Touch the target on the screen with one ngertip and brush
the surface quickly.
Zoom in
Touch the target on the screen with two ngertips held
together and move them apart to zoom in (magnify) the screen
image.
Zoom out
Touch the target on the screen with two ngertips stretched
apart and move them closer to zoom out (shrink) the screen
image.
Touch and Hold
Touch and hold the target on the screen with one ngertip for
a while to display a context menu or options page for an item.
Avoid
• Avoid scratching with sharp object on the screen. Only use
your ngertips to perform touch operation.
• Do not expose the screen to intensive light, spotlight, or
wide-spread light.
• Do not install the product to a location where is close to the
windows or glass-doors as the direct sunlight may aect the
touch-control performance.
• To avoid screen interference with each other, do not place 2
touch screens side by side as shown below.
Fig. Touch screens interference