EasyManua.ls Logo

Philips 75BDL3052E - Setting UI; Network and Internet Settings

Philips 75BDL3052E
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65BDL3052E/75BDL3052E/86BDL3052E
34
6. Setting UI
6.1. Settings
Setting menu consists of the following items:
(1). Network & Internet
(2). Signage Display
(3). Apps
(4). Display
(5). Security
(6). System
6.1.1. Network & Internet
6.1.1.1. Wi-Fi
Settings -> Network & Internet -> Wi-Fi
Important Note: This option is available only when the
supported Wi-Fi dongle is plugged. Wi-Fi dongle hot spot is
however not supported. Reboot the device whenever you plug
or remove the USB Wi-Fi dongle.
Enable Wi-Fi
Enable/disable Wi-Fi connection through main switch in
Setting -> Network & Internet -> Wi-Fi -> O/On toggle button.
Wi-Fi O
Wi-Fi On
On the available network list, select an AP (access point) on an
existing wireless network.
Enter the required settings.
At the bottom of the list, select Add network” to add a
network not shown on your list.
If needed, enter the network name (SSID) and security details.
Note:
When Wi-Fi is enabled, Ethernet will be disabled automatically.

Table of Contents

Related product manuals