Philips 75BDL3052E - OSD Menu; OSD Menu: Power Save and OPS Settings; Android Settings; Accessing Android Settings

65BDL3052E/75BDL3052E/86BDL3052E
51
OSD Transparency
Adjust OSD transparency.
• {O} - Transparency o.
• {1-100} - Transparency level 1-100
Power Save
Mode 1 [TCP o, WOL on, auto o]
Mode 2 [TCP o, WOL on, auto on/o]
Mode 3 [TCP on, WOL o, auto on/o]
Mode 4 [TCP on, WOL o, no auto on/o]
Power
Save
RCU Power
Button O
No Signal WOL Android
(ARM)
Mode 1 DC OFF DC OFF V ARM o
Mode 2 DC OFF when signal is back,
system wake up
V ARM o
Mode 3 Backlight
OFF
when signal is back,
system wake up
X ARM on
Mode 4 Backlight
OFF
Backlight always on,
show no signal
X ARM on
Note: Type-C not support "signal back wake up" in Mode2.
Following table is the action for Android board with dierent
power mode.
Power mode Mode 1, Mode 2 Mode 3, Mode 4
DC o System shutdown 1. Media Player, Browser, PDF
Player and SmartCMS will
close.
2. Android system goes to
default black launcher.
DC on System boot up Android system reboot. If
Logo settings is o, system
directly turn backlight on
without rebooting.
OPS settings
Set the OPS conguration under each power condition.
• {Auto} - After selecting {Card OPS} for video source input,
the OPS will be set to o when the display power is set to
o, or vice versa. If you set to other video source inputs, the
OPS will always be set to on.
• {Always o} - The OPS will always be set to o.
• {Always on} - The OPS will always be set to on.
Advanced option reset
Reset all settings except {Date and Time} in the advanced
option menu to factory preset values.
7.3. Android Settings
Open Android Settings
1. When enabled admin password from Android Setting ->
System tools, it must enter the password before entering the
android settings.
Default password is 1234.