Philips 9FF2CME User Manual

Philips Electronics
- 48 -
5 Setup
Use this section to setup PhotoFrame™ brightness levels, Time and date settings, turning off the
beep sound, checking the PhotoFrame™ status and on-screen information display language and
enable the delete function on your memory card. In addition, you can set your daily automatic
turn-off and turn-on time for PhotoFrame™, set an event reminder and decide if you want to
show a time clock on the display.
5.1 Brightness
Change the brightness settings of the PhotoFrame™ to achieve the best visibility depending on
the light conditions.
Press the menu button to access the Main Menu.
Navigate down to highlight the setup icon.
Navigate right or press the OK button to access the setup menu.
Navigate right to access the brightness control.
Navigate up and down to select the level of brightness.
Press Play Slideshow button to exit menu
Or navigate left to return to the previous menu

Philips 9FF2CME Specifications

Picture/Display

effective viewing area	169.6 x 111.7 mm
resolution	800 x 480 pixels
viewing angle	120º (H)/110º (V)
lifetime to 50% brightness	20000 hr
brightness	300 cd/m²

Storage Media

memory card types	Compact Flash type I, Secure Digital (SD), Multimedia Card, xD card, Memory Stick, Memory Stick Pro
built-in memory capacity	110 to 150 photos
card reader	Built in (2x)

Power

power consumption	12 W
operating time on battery	<1 hr
power mode supported	AC powered, Battery powered

Weight and Dimensions

set dimensions with stand	260 x 199 x 108 mm
weight	0.97 kg
temperature range (operation)	0°C to 45°C
temperature range (storage)	-20°C to 60°C