Philips 9FF2CME User Manual

Philips Electronics
- 63-
6 Getting help
6.1 Checking Display Status
You may check the status of your Photo Frame— whether the system is ON, if the battery is
charging, how many more photos can be stored, how much battery power remains, which
media are currently connected, or the Photo Frame software version.
From the LED light indicator in the back, you can determine whether the system is ON or the
battery is charging:
Power LED
Lighting Blue: System ON/ Battery charged
Turned OFF: System OFF
Flashing Blue: Battery is charging
Below is an easy way to look up other information.
Press the menu button to access the Main Menu.
Navigate down to highlight the setup icon.
Navigate right or press the OK button to access the setup menu
Navigate down button to go to status.
The status of the Photo Frame is shown in the right window.
Free space (pic): XX (Estimates of how many additional photos can be stored in
Photo Frame)
Power: DC (when main is supplying power)
XX% (estimates of battery power remaining, when internal battery is supplying power.)
Connected media: (Lists all memory cards connected to Photo Frame)
Firmware: (Photo Frame software version)
• Press menu button again to leave this menu.

Philips 9FF2CME Specifications

Picture/Display

effective viewing area	169.6 x 111.7 mm
resolution	800 x 480 pixels
viewing angle	120º (H)/110º (V)
lifetime to 50% brightness	20000 hr
brightness	300 cd/m²

Storage Media

memory card types	Compact Flash type I, Secure Digital (SD), Multimedia Card, xD card, Memory Stick, Memory Stick Pro
built-in memory capacity	110 to 150 photos
card reader	Built in (2x)

Power

power consumption	12 W
operating time on battery	<1 hr
power mode supported	AC powered, Battery powered

Weight and Dimensions

set dimensions with stand	260 x 199 x 108 mm
weight	0.97 kg
temperature range (operation)	0°C to 45°C
temperature range (storage)	-20°C to 60°C