Philips 9FF2CME User Manual

Philips Electronics
-8 -
1.2.5 Setting Time, Date and Clock
Use this function to set the time and date of the PhotoFrame™.
Press the menu button to access the Main Menu.
Navigate down to highlight the setup icon.
Navigate right or press the OK button to access the setup menu.
Navigate down to Clock.
Navigate right to access the Time settings.
Time:
Navigate up and down to select the time.
Navigate left and right to move between hours, minutes and AM/PM.
Press the OK button to confirm selection.
Date:
Navigate up and down to select the date.
Navigate left and right to move between days, months and years.
Press the OK button to confirm selection.
Show Clock:
If you want to use the PhotoFrame™ as a clock
Navigate up and down to select Show clock
Navigate right then up and down to select No Clock ,Full Screen , In
Slideshow or Both
Press the OK button to confirm selection.
Press Play Slideshow to leave this menu and play the slideshow
NOTE: The time and date must be set before the Event Reminder and Auto on/off functions
can be set.
Note 2: Show clock
You can have a clock displayed on the screen on the top of your pictures in Slideshow and
browse mode.

Philips 9FF2CME Specifications

Picture/Display

effective viewing area	169.6 x 111.7 mm
resolution	800 x 480 pixels
viewing angle	120º (H)/110º (V)
lifetime to 50% brightness	20000 hr
brightness	300 cd/m²

Storage Media

memory card types	Compact Flash type I, Secure Digital (SD), Multimedia Card, xD card, Memory Stick, Memory Stick Pro
built-in memory capacity	110 to 150 photos
card reader	Built in (2x)

Power

power consumption	12 W
operating time on battery	<1 hr
power mode supported	AC powered, Battery powered

Weight and Dimensions

set dimensions with stand	260 x 199 x 108 mm
weight	0.97 kg
temperature range (operation)	0°C to 45°C
temperature range (storage)	-20°C to 60°C