Philips 9FF2CME User Manual

Philips Electronics
- 66 -
A: Connect Photo Frame to PC and put photos directly under the root directory of the
Photo Frame drive. Disconnect the USB cable. After a few seconds, all photos in the
root directory will be automatically added to Photo Frame and the directory will be
emptied. Note that this operation does not apply to photos in sub-directories.
15) Q: I'm trying to upload pictures from my PC to a memory card, which I'm then inserting
into the DPD. However, the DPD doesn't show the photos. What can I do?
A: Load all the photos you want to upload to DPD in the root directory of your
memory card. Power off your DPD, insert the memory card, and then restart DPD.
After a few seconds, all photos in the root directory of the memory card will be
automatically added to Photo Frame. The root directory on memory card will NOT be
emptied after this operation. Note that this operation does not apply to photos in sub-
directories.

Philips 9FF2CME Specifications

Picture/Display

effective viewing area	169.6 x 111.7 mm
resolution	800 x 480 pixels
viewing angle	120º (H)/110º (V)
lifetime to 50% brightness	20000 hr
brightness	300 cd/m²

Storage Media

memory card types	Compact Flash type I, Secure Digital (SD), Multimedia Card, xD card, Memory Stick, Memory Stick Pro
built-in memory capacity	110 to 150 photos
card reader	Built in (2x)

Power

power consumption	12 W
operating time on battery	<1 hr
power mode supported	AC powered, Battery powered

Weight and Dimensions

set dimensions with stand	260 x 199 x 108 mm
weight	0.97 kg
temperature range (operation)	0°C to 45°C
temperature range (storage)	-20°C to 60°C