Alignments
EN 97A02U AA 8.
Values: OFF= Disabled, no automatic switch to standby. ON=
Enabled, set switches to standby after 4 hours.
EPG: Electronic Program Guide.
Function: Disable/Enable EPG feature.
Values: OFF= Disabled, EPG feature is not available. ON=
Enabled, EPG feature is available.
P50: P50 (Easylink).
Function: Disable/Enable P50 feature.
Values: OFF= Disabled, P50 feature not available. ON=
Enabled, P50 feature is available.
HOSP: Hospitality.
Function: Disabled/Enabled hospitality mode.
Values: OFF= Disabled, hospitality mode is disabled. ON=
Enabled, hospitality mode is enabled.
Region
TWKE: Taiwan/Korea.
Function: Select between Taiwan and Korea.
Values: OFF= Korea. ON= Taiwan
MIDE: Middle East.
Function: Select Middle East region.
Values: OFF= Non-Middle East. ON= Middle East
Note: This option is also used to differentiate the AP PAL
(2AP1) and AP Middle-east (2AP2) clusters. If MIDE is set to
OFF, it is referring to 2AP1 cluster. If MIDE is ON, it is referring
to 2AP2 Cluster.
EWEU: East/West Europe region.
Function: This option is used to allow the development team to
trigger the NVM initialization process during the development
phase.
Values: OFF= Pressing the Freeze key in the Aux mode will
NOT change the password of the NVM. ON= Pressing the
Freeze key in the Aux mode will change the password of the
NVM. The NVM will be re-initialized with the default values
when the TV is wakeup from standby.
Note: This option is only applicable A02E 2003
To Next Page
Loading...
