Philips AC2936 - 5 Storage; 6 Troubleshooting

12 EN
Filter reset
You can also replace the lter before lter replacement alert ( ) displays on the screen�
After replacing a lter, you need to reset the lter lifetime counter manually�
3
s
+
1 Touch the power
button for 3 seconds to
turn o the appliance
and unplug from power
socket�
2 Put the power plug in
the power socket�
3 Within 15 seconds after power
on, touch and hold and
button for 3 seconds to reset
the lter lifetime counter.
5 Storage
1 Turn o the air purier and unplug from the power socket�
2 Clean the air purier, particle sensor and the surface of the lter (see the chapter
“Cleaning and maintenance”)�
3 Let all parts air dry thoroughly before storing�
4 Wrap the lter in air tight plastic bags�
5 Store the air purier, lter in a cool, dry location�
6 Always thoroughly wash hands after handling lters�
6 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance� If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country�