Philips AW2000 - Option 3: Set up Wireless Connection to `A WPS Router

14 EN
9 Wait until the power/status indicator on
AW2000 turns solid white.
» AW2000 is connected to your home
Wi-Fi network successfully.
Note
•
Aftersuccessfulnetworksetup,youcantapRock n'
Roll on the above app screen to get ready for music
playdirectly.Formoredetails,gotothe'Play'section
(see 'Play' on page 16).
Option 3: Set up wireless
connection to `a WPS router
1
Select Wi-Fi PROTECTED SETUP and tap
Next.
2 Read the WPS setup instructions.
3 Asinstructed,pressandholdWI-FI SETUP
on the back of AW2000.
» The power/status indicator blinks
amber and green alternately.
> 4S