Philips BDP1300 - Picture; Sound

7EN
Picture
1 Press .
2 Select [Setup] > [Video] to access the video setup options.
• [TV display]: Select a picture display format to t the TV screen.
• [HDMI video]: Select an HDMI video resolution.
• [HDMI Deep Color]: Display colors with more shades and hues when the video
content is recorded in Deep Color and the TV supports this feature.
• [Picture settings]: Select a predened color setting.
• [Closed Caption]: Turn on or off the display of sound effects in subtitles
(applicable only when a disc and a TV support this feature).
Note
• If you change a setting, make sure that the TV supports the new setting.
Sound
1 Press .
2 Select [Setup] > [Audio] to access the audio setup options.
• [Night mode]: Select quiet or full dynamic sound. Night mode decreases the
volume of loud sound and increases the volume of soft sound (such as speech).
• [HDMI audio]: Set an HDMI audio format when this player is connected through
HDMI.
• [Digital audio]: Select an audio format for the sound output when this player is
connected through a digital connector (coaxial).
• [PCM downsampling]: Set the sampling rate for PCM audio output when this
player is connected through a digital connector (coaxial).
Note
• For settings related to HDMI, the TV must be connected through HDMI.
• Night mode is only available for Dolby
®
TrueHD / Dolby
®
Digital Plus encoded DVD and
Blu-ray discs.
English
BDP1300_F7_UM_V2.0.indb 7 4/14/2015 5:17:17 PM