Philips BDP1502 - Voice Guide

EN 40
10.5. Voice guide
Q (HOME) A “Setup” A “Accessibility”
Menus to configure various settings for the voice guide function.
1. Use [ ] to select “Setup” in the home menu, then press [OK].
2. Use [
] to select “Accessibility”, then press [OK].
3. Use [
] to select the desired setting, then press [OK].
“Voice Guide”:
Turns on / off the voice guide function.
“Voice Guide Volume”:
Configures the volume of the voice.
“Voice Guide Speed”:
Configures the speech rate.
“Voice Guide Pitch”:
Configures the voice pitch.
“Voice Guide Verbosity”:
Configures whether to read detailed information on the current item / operation.
4. Use [ ] to select the desired setting, then press [OK].
5. Press [Q (HOME)] to exit.
NoteD
• In order to enable the voice guide function, the OSD language needs to be set to English or Spanish. Voice guide
is not available in French.
• When voice guide is set to on, the HDMI audio setting is fixed to LPCM. Changing the HDMI audio setting is only
possible when voice guide is set to off.
• While the voice guide function is enabled, operations may slow down.
• When this unit is in resume-on-stop mode, the “Voice Guide” setting item is grayed-out and is not configurable.
In order to configure “Voice Guide”, remove the disc to exit resume-on-stop mode.