Philips BDP2500 - Night Mode, HDMI Audio, Digital Audio

34
EN
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press •
.
[Night Mode]
Make a loud sound level softer and a soft sound level louder to play the
disc at a low volume, without disturbing other persons.
• [Auto] - Applicable to tracks with Dolby True HD audio.
• [On] – For quiet viewing at night.
• [Off] – For surround sound with a full dynamic range.
Note
Applicable only to Dolby encoded DVD-video or BD-video. •
[HDMI Audio]
Select an HDMI audio output when you connect this product and the TV/
audio device with an HDMI cable.
• [Bitstream] – Select the best original HD audio experience (only via
an HD audio compatible receiver).
• [Auto] – Detect and select the best supported audio format
automatically.
[Digital Audio]
Select an audio format for the sound output from the DIGITAL OUT jack
(coaxial/optical).
• [Auto] - Detect and select the best supported audio format
automatically.
• [PCM] - The audio device does not support multi-channel format.
Audio is downmixed to two-channel sound.
• [Bitstream] - Select the original audio to experience Dolby or DTS
audio (BD-video special sound effect is disabled).
Note
Ensure that the audio format is supported by the disc and the connected audio device •
(amplifier/receiver).
When
• [Bitstream] is selected, interactive audio like button sound is muted.