Alignments
EN 167BJ3.1E LA 8.
8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
• After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched "off" and "on" again with the Mains switch (the
NVM is then read again).
8.4.2 Dealer Options
For dealer options, in SAM select “Dealer options” and then
“Personal options”.
Table 8-2 Dealer options
8.4.3 (Service) Options
Select the sub menu's to set the initialization codes (options) of
the set via text menus.
Table 8-3 Service options
Menu item Subjects Options Description
Personal Options Virgin Mode On TV starts up (once) with a language selection menu after the Mains switch is turned "on" for the
first time (virgin mode)
Off TV does not start up (once) with a language selection menu after the Mains switch is turned "on"
for the first time (virgin mode)
Autostore Mode None Determines where the set distracts the information from for the autostore functionality
PDC/VPS
TXT page
PDC/VPS/TXT
Menu-item Subjects Options Description
PIP/DS Dual Screen None no DS
Data EPG - Electronic Program Guide
Display Screen “Value” Used screen size, type, and resolution
Clear LCD On / Off Feature present / not present
Dimming Backlight On / Off Feature present / not present
Video Repro Picture Processing No Spider / Spider Feature not present / present
Combfilter None / 2D / 3D
Ambient Light Off / Mono / Stereo/Triple / Quad Inverter not present / one inverter / two inverters / three inverters / four inverters
Pacific 3 On Feature present
MOP Off Feature not present
Light sensor Off / On Sensor active / not active
Source Selection EXT1 type CVBS RGB
EXT2 type CVBS Y/C RGB P50
EXT3 type YPbPr LR HV
EXT4 type None
HDMI 1 None No HDMI
With analogue audio DVI
Without analogue audio HDMI
HDMI 2 None No HDMI
With analogue audio DVI
Without analogue audio HDMI
USB version 2.0 + CR USB 2.0 in cardreader panel
Ethernet Off Connector not present
VGA Off
S/PDIF inputs 1 connector 1 connector present (in)
To Next Page