32
Tip
When the unit is reset, all the settings remains
unchanged.
•
Remove the unit
To repair, replace fuse, or replace the unit
with another car audio, remove it from the
dashboard.
1 Take off the trim plate.
2 Screw off the four (4) screws on the left/
right side of the unit.
3 Pull the unit out from the dashboard.
AV I NAV IN
9 Others
Listen to other devices
You can connect an external audio/video device
to the unit.
1 Connect the device to the unit with the
supplier AV cable.
2 Touch to display main menu.
3 Touch [AV IN] .
4 Begin play on the device (see the device
instructions).
Reset
When the unit hangs up, you can reset it.
1 Press RESET with a ball-point pen or
similar tool.
AV I N
AV IN
AV I N
AV IN
EN
EN.indd Sec1:32EN.indd Sec1:32 2008-11-14 13:23:352008-11-14 13:23:35