Philips DC932 - Identification Number

SECURITY
For
theft
protection
this
set
is
provided
with
the
following
security
features:
1. DETACHABLE FRONT
*¢
Always
take
the
detachable
front
with
you
when
leaving
the
car.
Keep
it
in
its
protective
case.
°
For
safety
reasons,
always
replace
the
detachable
front
before
starting
to
drive.
REMOVING FRONT
Press the release key.
Remove the front.
REPLACING FRONT
Insert front starting with the left-hand side
of the set.
Push the front until it clicks into position.
Cleaning
connectors
for
detachable
front:
To
ensure
good
connection
between
the
set
and
the
detachable
part,
it
is
advisable
to
clean
the
connectors
with
a
cotton
swab
from
time
to
time.
2. SWITCHABLE WARNING LED
When
the
detachable
front
is
removed,
the
red
LED
flashes
to
indicate
that
the
set
is
protected
(the set must be connected according to the
‘MOUNTING INSTRUCTIONS’).
* You can stop, or start, the LED from flashing by
pressing the switch (X) on the set for at least
2 seconds.
3. SECURITY WARNING STICKERS
® Stick the supplied ‘Security’ warning stickers
on your car windows.
4. IDENTIFICATION NUMBER
This set has a unique identification number
(stated on the ‘Security card’).
*
Remove
the
'Security
card’
before
installing
the
set.
Philips Car Systems
Security Card
ee
KEEP THIS CARD SAFELY - NOTIN YOUR.CAR
PHILIPS