What to do if my Philips DigiTrak XT displays 'No Cable'?
If the Philips Voice Recorder displays 'No Cable', ensure the patient cable (lead set) is connected to the recorder. The recorder will not pass the splash screen unless a cable is connected. Check that the recorder pins are not broken or bent and that the cable connector is not damaged.
What should I do if my Philips Voice Recorder has a self test failure?
If the Philips Voice Recorder experiences a self-test failure, write down the error code, restart the recorder, and call for service.
Why is there no splash screen when my Philips DigiTrak XT Voice Recorder is placed in dual dock?
If there is no splash screen when the Philips Voice Recorder is placed in the dual dock, ensure that the DigiTrak XT cable or dual dock cable is firmly connected to a USB port on the PC. Make sure the PC is powered on. Try replacing the DigiTrak XT cable or dual dock. Also, remove the battery from the recorder before placing it in the dual dock.
The DigiTrak XT Holter recorder is intended for patients requiring ambulatory monitoring.
Explanation of symbols used on the DigiTrak XT recorder labels and documentation.
Important safety, material, and operational guidelines for using the DigiTrak XT recorder.
Details system requirements and how to access product documentation.
Overview of the DigiTrak XT recorder's buttons, connections, and physical layout.
Description of recorder screens, menus, and how to navigate them.
Covers belt clip, date/time, connecting to dock, patient prep, lead checks, and starting recording.
Information on maintaining and cleaning the DigiTrak XT recorder.
Guidance for resolving common issues, errors, and contacting service.
List of approved supplies, parts, and detailed technical specifications of the recorder.
General| Sampling Rate | 8 kHz |
|---|---|
| Recording Format | WAV |
| Microphone Type | Built-in omnidirectional microphone |
| Playback Options | Built-in speaker, headphone jack |
| Connectivity | USB |
To Next Page