Philips DVDR615 - Page 43

Diagnostic Software
EN 43DVDR615/69 5.
Example (AV2) DS:> 930
093006: This nucleus is not supported by the engine
Error @
Example (AV3) DS:> 930
093000:
Test OK @
Nucleus Name DS_BE_AdjustLaserControl
Nucleus Number 931
Description Adjust the DVD-M (with the OPU) with PCBA. (So adjusts the two PCBS to each other)
Technical - Check if an AV2 or AV3 is connected
- In case of an AV2 display a “not supported” message
- In case of an AV3 adjust the DVD-M (with the OPU) with PCBA by sending a
S2B command to align the PCBs to each other.
Execution Time 30 seconds
User Input None
Error Number Description
93100 The command executed successfully
93101 There was a time-out while communicating
93102 The Basic Engine returned an unexpected result
93103 The BE returned an error code
93104 No acknowledge received from BE
93105 Communicating with the Basic Engine failed
93106 Unable to enter service mode
93107 This nucleus is not supported by the engine
Example (AV2) DS:> 931
093107: This nucleus is not supported by the engine
Error @
Example (AV3) DS:> 931
093100:
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料